top of page


Public·33 members

Crystal Reports 8.5 Download ((INSTALL)) Free Crack Mdf

Abstract:This study systematically investigated the influence of multi-directional forging (MDF) on the microstructural evolution, hot deformation behavior, and tensile properties of a β-solidifying TiAl alloy. The initial lamellar microstructure of an as-cast alloy was remarkably refined and homogenized by three-step MDF. High temperatures and multi-pass deformations were conducive to the decomposition of lamellae. A crack-free billet was obtained through three-step MDF, with a deformation temperature of 1250 C and a forging speed of 0.1 mm/s, indicating that MDF can be applied to β-solidifying TiAl alloys by the proper control of the alloy composition and process parameters. Microstructural observation showed that the billet mainly consists of fine and equiaxed γ grains and a small amount of β phase. The tensile properties of the multi-directional forged alloy were also significantly improved, due to microstructure refinement. The ultimate tensile strength (UTS) and elongation (δ) at room temperature were 689.4 MPa, and 0.83%, respectively. The alloy exhibits excellent ductility at 700 C. When the temperature was increased to 700 C, the UTS decreased to 556 MPa and δ increased to 5.98%, indicating that the alloy exhibits excellent ductility at 700 C. As the temperature further increased to 750 C, δ dramatically increased to 46.65%, indicating that the ductile-brittle transition temperature of the alloy is between 700 C and 750 C.Keywords: TiAl; multi-directional forging; microstructure; mechanical properties

crystal reports 8.5 download free crack mdf



Welcome to the group! You can connect with other members, ge...